PC power supplies: wattage, efficiency and connectors

A desktop power supply (PSU) converts mains electricity into the stable voltages every component needs, so it deserves as much attention as the graphics card. You will find ATX and SFX units from 500W to 1200W by Corsair, Lian Li and Powertech, many of them fully modular, plus sleeved cable kits and 12V-2x6 GPU power bridges for tidy builds.

Size the wattage to your build with some headroom: a mid-range gaming PC is usually comfortable on 750W to 850W, while high-end graphics cards and top processors call for 1000W or more. Efficiency ratings such as 80 Plus Gold or Platinum and Cybenetics badges mean less wasted heat and quieter fans. For recent high-end graphics cards, an ATX 3.1 unit with a native 12V-2x6 connector avoids bulky adapters.

Frequently asked questions

How many watts does my PC power supply need?

Add up the rated power of the graphics card and processor, allow around 100W for the rest of the system, then leave 20 to 30% headroom. Graphics card makers publish a recommended PSU wattage, which is a good starting point. A power supply that runs at around half to two thirds of its capacity under load is usually quieter and more efficient.

What is ATX 3.1 and the 12V-2x6 connector?

ATX 3.1 is the current revision of the ATX power supply specification for desktop PCs. It keeps the requirement to handle short power spikes from modern graphics cards and adopts the 12V-2x6 connector, a revised version of 12VHPWR with improved sensing pins that can deliver up to 600W to a graphics card through one cable. Always make sure the plug is fully seated.

Is a modular power supply worth it?

With a fully modular PSU you connect only the cables you need, which means less clutter, better airflow and easier cable management, especially in compact or glass-sided cases. It also lets you fit sleeved cable kits later. Use only cables made for your PSU's type and generation, for example Corsair Type 4 or Type 5, because modular pinouts differ between brands and series.

Does 80 Plus Gold or Platinum make a difference?

The rating shows how efficiently the PSU converts power. At typical loads a Gold unit is around 90% efficient and a Platinum unit around 92%, so less energy turns into heat. In practice this means a cooler, quieter system and slightly lower electricity use, which adds up for PCs that run many hours a day.